Control your Lego® Power Functions motors using your micro:bit, an infrared LED and MakeCode.
Build a simple remote control car with Micro:bit for kids.
Measures and records temperature with BBC Micro:bit.
Build a magic trick to amaze your friends that uses the micro:bit’s compass to detect a nearby magnet!
Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.
DIY craft propeller anemometer, connected to BBC Micro:bit using Snap:bit and Snap Circuits.
Show the status and sensor value to an OLED display.
Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.
A Master Micro:bit (teacher) issues math equations to Client Micro:bits (students). Students then compete to be first w/ the correct answer.
After shaking the micro:bit, it generates a random number (0 to 31), which will be shown with the led matrix (0 to 5 dots, 5 bits).
Learn how to play sounds and music from the BBC micro:bit through the Whistle Chip (WC) of Snap Circuits.
A Master Microbit(Teacher) issues out math equations to Client Microbits(Students). Students then compete to be first w/ the correct answer.
Learn how to turn your micro:bit to a countdown timer that emits light and sound using Snap Circuits components.
Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Learn how to program the Color Organ of Snap Circuits to slowly switch through the colors of the rainbow.
Learn how to apply special effects on the LED of Snap Circuits with the help of the BBC micro:bit.
Learn how to control the state of the LED with the press switch.
Learn how to play sounds and music from the BBC micro:bit through the Speaker of Snap Circuits.
Blow Game is based on the project "Measure Wind Speed with Micro:bit and Snap Circuits" in which two players try to over blow the other.
Short of batteries? Power your Snap Circuits from the micro:bit!
Learn how to power the micro:bit from the battery holder of Snap Circuits.
Learn how to use the radio function of the micro:bit to control remotely the Snap Circuits.
Learn how to change the brightness of the connected Red LED (D1) of Snap Circuits by writing an analog signal to the micro:bit pin.
Use a TV remote control to the micro:bit to turn on and off the DC Motor of Snap Circuits.
Terms. Site powered by Hackster.io