This is a project I built and showcase here. It represents my virtual Best Wishes for these holidays, to all the community members.
In this article, I am going to walk you through the step-by-step procedure of how to create a traffic light system using BBC Micro:Bit.
A Micro:Maqueen Robot Car.
In this article, I am going to talk about sensing light using a photo-resistor sensor and BBC Micro:Bit.
This tutorial is all about working with the light level of micro:bit and to know that the place where you're is dark or brighten.
Use Python to program some sweet ground-effect lighting animations for the Hackster Glowboard! Powered by the BBC Micro:bit. ✨
Some geeky wand enhancement for all those Harry Potter lovers out there. Illuminate your wand.
Micro:Bit Police Red and Blue Flashing LEDs and Siren
Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.
Mimic the roll of a dice by connecting an array of LEDs to the versatile BBC micro:bit, a bit of Python code, and hey presto, start rolling!
Learn how to turn your micro:bit to a countdown timer that emits light and sound using Snap Circuits components.
Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.
Learn how to apply special effects on the LED of Snap Circuits with the help of the BBC micro:bit.
Turn the LED from Snap Circuits into a Morse code beacon with the help of the BBC micro:bit.
Learn how to change the brightness of the connected Red LED (D1) of Snap Circuits by writing an analog signal to the micro:bit pin.
Learn how to control the state of the LED with the press switch.
Terms. Site powered by Hackster.io