Short of batteries? Power your Snap Circuits from the micro:bit!
Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Learn how to turn your micro:bit to a countdown timer that emits light and sound using Snap Circuits components.
Learn how to apply special effects on the LED of Snap Circuits with the help of the BBC micro:bit.
Learn how to change the brightness of the connected Red LED (D1) of Snap Circuits by writing an analog signal to the micro:bit pin.
Learn how to control the state of the LED with the press switch.
Turn the LED from Snap Circuits into a Morse code beacon with the help of the BBC micro:bit.
Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.
Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.
Use Python to program some sweet ground-effect lighting animations for the Hackster Glowboard! Powered by the BBC Micro:bit. ✨
A laser projector made with 25 dot lasers, a micro:bit board, and Ada programming.
This is a project I built and showcase here. It represents my virtual Best Wishes for these holidays, to all the community members.
I designed this project for my kids with the idea of combining 3D printing, laser cutting, electronics, coding and a little bit of science.
In this article, I am going to talk about sensing light using a photo-resistor sensor and BBC Micro:Bit.
This tutorial is all about working with the light level of micro:bit and to know that the place where you're is dark or brighten.
Adding an active NeoPixel lighting system to your E-Bike using the micro:bit.
Using a micro:bit and a NeoPixel strip, create your custom lighting for dark night bicycle rides.
Terms. Site powered by Hackster.io