Learn how to play sounds and music from the BBC micro:bit through the Whistle Chip (WC) of Snap Circuits.

Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.

Short of batteries? Power your Snap Circuits from the micro:bit!

Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).

Turn the LED from Snap Circuits into a Morse code beacon with the help of the BBC micro:bit.

Learn how to apply special effects on the LED of Snap Circuits with the help of the BBC micro:bit.

Learn how to change the brightness of the connected Red LED (D1) of Snap Circuits by writing an analog signal to the micro:bit pin.

Learn how to use the photoresistor (RP) of Snap Circuits as a light sensor input for the micro:bit.

Learn how to control the state of the LED with the press switch.

Learn how to receive input from the Press Switch (S2) of Snap Circuits and process it with the micro:bit.