Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).

Learn how to control the state of the LED with the press switch.

Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.

Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.

Short of batteries? Power your Snap Circuits from the micro:bit!

Add some life to your Halloween decorations! Using micro:bit + LEDs, and some spooky music!

Micro:Bit Police Red and Blue Flashing LEDs and Siren

In this article, I am going to talk about sensing light using a photo-resistor sensor and BBC Micro:Bit.

This tutorial is all about working with the light level of micro:bit and to know that the place where you're is dark or brighten.

Adding an active NeoPixel lighting system to your E-Bike using the micro:bit.

Using a micro:bit and a NeoPixel strip, create your custom lighting for dark night bicycle rides.