Using a micro:bit and a NeoPixel strip, create your custom lighting for dark night bicycle rides.

In this article, I am going to talk about sensing light using a photo-resistor sensor and BBC Micro:Bit.

Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.

This tutorial is all about working with the light level of micro:bit and to know that the place where you're is dark or brighten.

Micro:Bit Police Red and Blue Flashing LEDs and Siren

Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.

Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).

Short of batteries? Power your Snap Circuits from the micro:bit!

Adding an active NeoPixel lighting system to your E-Bike using the micro:bit.

Learn how to control the state of the LED with the press switch.

Add some life to your Halloween decorations! Using micro:bit + LEDs, and some spooky music!