In this quick and easy project, you build a micro:bit moisture sensor

Learn how to use the infrared receiver (U24) of Snap Circuits to detect input from remote controls with the micro:bit.

Learn how to program the micro:bit to turn the DC Motor (M1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).

Learn how to power the micro:bit from the battery holder of Snap Circuits.

Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.

Learn how to play sounds and music from the BBC micro:bit through the Whistle Chip (WC) of Snap Circuits.

Learn how to play sounds and music from the BBC micro:bit through the Speaker of Snap Circuits.

Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).

Learn how to use the photoresistor (RP) of Snap Circuits as a light sensor input for the micro:bit.

Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.

Learn how to use your micro:bit for programming the RGB LED integrated into the Color Organ of Snap CIrcuits.

Learn how to use the radio function of the micro:bit to control remotely the Snap Circuits.

Learn how to receive input from the Press Switch (S2) of Snap Circuits and process it with the micro:bit.

Learn how to control the state of the LED with the press switch.

Learn how to amplify the sound from the BBC micro:bit and hear it loud through the Speaker of Snap Circuits.

Learn how to use the Press Switch (S2) of Snap Circuits as button A or button B of the micro:bit.

Learn how to amplify and control the volume of the sound from the BBC micro:bit through the Speaker of Snap Circuits.