At the end of this article, you will have complete knowledge of how you can control a mini servo using a BBC micro:bit.
Using the Micro:bit & xCHIPs assembly of this temperature monitor is effortless. Coding is a piece of cake with the blocks of software too!
In this quick and easy project, you build a micro:bit moisture sensor
Create your own shake controlled weather station with the help of this tutorial in under 5 minutes!
DIY craft propeller anemometer, connected to BBC Micro:bit using Snap:bit and Snap Circuits.
Learn how to use the infrared receiver (U24) of Snap Circuits to detect input from remote controls with the micro:bit.
Micro:Bit Police Red and Blue Flashing LEDs and Siren
Learn how to program the micro:bit to turn the DC Motor (M1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
The Pomodoro technique is a time management method. The technique uses a timer (work for 25 minutes, rest for 5, and so on).
Learn how to power the micro:bit from the battery holder of Snap Circuits.
Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.
Learn how to play sounds and music from the BBC micro:bit through the Whistle Chip (WC) of Snap Circuits.
Learn how to play sounds and music from the BBC micro:bit through the Speaker of Snap Circuits.
Super simple yet fun humidity project. Easy assembly and programming, you'll be ready to shake in 5 minutes.
Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.
Learn how to use the photoresistor (RP) of Snap Circuits as a light sensor input for the micro:bit.
Learn how to receive input from the Press Switch (S2) of Snap Circuits and process it with the micro:bit.
Learn how to use your micro:bit for programming the RGB LED integrated into the Color Organ of Snap CIrcuits.
Learn how to use the radio function of the micro:bit to control remotely the Snap Circuits.
Learn how to control the state of the LED with the press switch.
Use a TV remote control to request the micro:bit to light a lamp and automatically turns it off in 5 seconds.
This code uses the micro bit's radio ability to send and receive number via radio.
Learn how to amplify the sound from the BBC micro:bit and hear it loud through the Speaker of Snap Circuits.
Terms. Site powered by Hackster.io