Learn how to program the micro:bit to turn the DC Motor (M1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Control your Lego® Power Functions motors using your micro:bit, an infrared LED and MakeCode.
Build a simple remote control car with Micro:bit for kids.
After shaking the micro:bit, it generates a random number (0 to 31), which will be shown with the led matrix (0 to 5 dots, 5 bits).
Measures and records temperature with BBC Micro:bit.
Build a magic trick to amaze your friends that uses the micro:bit’s compass to detect a nearby magnet!
A Master Microbit(Teacher) issues out math equations to Client Microbits(Students). Students then compete to be first w/ the correct answer.
DIY craft propeller anemometer, connected to BBC Micro:bit using Snap:bit and Snap Circuits.
Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.
Show the status and sensor value to an OLED display.
Learn how to turn your micro:bit to a countdown timer that emits light and sound using Snap Circuits components.
Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
A Micro:bit-based game to help teachers train their students in math through a fun and competitive manner by counting LEDs in icons.
A Master Micro:bit (teacher) issues math equations to Client Micro:bits (students). Students then compete to be first w/ the correct answer.
Learn how to power the micro:bit from the battery holder of Snap Circuits.
Learn how to play sounds and music from the BBC micro:bit through the Speaker of Snap Circuits.
Learn how to play sounds and music from the BBC micro:bit through the Whistle Chip (WC) of Snap Circuits.
Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.
Short of batteries? Power your Snap Circuits from the micro:bit!
Turn the LED from Snap Circuits into a Morse code beacon with the help of the BBC micro:bit.
Learn how to apply special effects on the LED of Snap Circuits with the help of the BBC micro:bit.
Learn how to use the photoresistor (RP) of Snap Circuits as a light sensor input for the micro:bit.
Learn how to change the brightness of the connected Red LED (D1) of Snap Circuits by writing an analog signal to the micro:bit pin.
Learn how to control the state of the LED with the press switch.
Terms. Site powered by Hackster.io