Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.
DIY craft propeller anemometer, connected to BBC Micro:bit using Snap:bit and Snap Circuits.
Learn how to play sounds and music from the BBC micro:bit to the Speaker of Snap Circuits.
Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.
Learn how to power the micro:bit from the battery holder of Snap Circuits.
Learn how to turn your micro:bit to a countdown timer that emits light and sound using Snap Circuits components.
Learn how to play sounds and music from the BBC micro:bit to the Whistle Chip (WC) of Snap Circuits.
Turn the LED from Snap Circuits into a Morse code beacon with the help of the BBC micro:bit.
Learn how to apply special effects on the LED of Snap Circuits with the help of the BBC micro:bit.
Learn how to change the brightness of the connected Red LED (D1) of Snap Circuits by writing an analog signal to the micro:bit pin.
Learn how to control the state of the LED with the press switch.
Learn how to receive input from the Press Switch (S2) of Snap Circuits and process it with the micro:bit.
Terms. Site powered by Hackster.io