Learn how to amplify and control the volume of the sound from the BBC micro:bit through the Speaker of Snap Circuits.
Learn how to amplify the sound from the BBC micro:bit and hear it loud through the Speaker of Snap Circuits.
Learn how to use the Press Switch (S2) of Snap Circuits as button A or button B of the micro:bit.
Use a TV remote control to the micro:bit to turn on and off the DC Motor of Snap Circuits.
Use a TV remote control to request the micro:bit to light a lamp and automatically turns it off in 5 seconds.
Learn how to use the infrared receiver (U24) of Snap Circuits to detect input from remote controls with the micro:bit.
Learn how to use the radio function of the micro:bit to control remotely the Snap Circuits.
Build your own pot of gold for St. Patrick's Day from Lego bricks and make it count the coins with the help of Micro:bit and Snap Circuits.
Blow Game is based on the project "Measure Wind Speed with Micro:bit and Snap Circuits" in which two players try to over blow the other.
Learn how to program the Color Organ of Snap Circuits to slowly switch through the colors of the rainbow.
Learn how to use your micro:bit for programming the RGB LED integrated into the Color Organ of Snap CIrcuits.
Learn how to program the micro:bit to turn the DC Motor (M1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Learn how to use the photoresistor (RP) of Snap Circuits as a light sensor input for the micro:bit.
Learn how to turn your micro:bit to a countdown timer that emits light and sound using Snap Circuits components.
Learn how to apply special effects on the LED of Snap Circuits with the help of the BBC micro:bit.
Learn how to change the brightness of the connected Red LED (D1) of Snap Circuits by writing an analog signal to the micro:bit pin.
Learn how to play sounds and music from the BBC micro:bit through the Whistle Chip (WC) of Snap Circuits.
DIY craft propeller anemometer, connected to BBC Micro:bit using Snap:bit and Snap Circuits.
Learn how to play sounds and music from the BBC micro:bit through the Speaker of Snap Circuits.
Learn how to control the state of the LED with the press switch.
Learn how to receive input from the Press Switch (S2) of Snap Circuits and process it with the micro:bit.
Turn the LED from Snap Circuits into a Morse code beacon with the help of the BBC micro:bit.
Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.