At the end of this article, you will have complete knowledge of how you can control a mini servo using a BBC micro:bit.
Using the Micro:bit & xCHIPs assembly of this temperature monitor is effortless. Coding is a piece of cake with the blocks of software too!
In this quick and easy project, you build a micro:bit moisture sensor
Display screen Showing time and temperature with your micro:bit.
Here, we'll learn how to make a simple arcade game.
Create your own shake controlled weather station with the help of this tutorial in under 5 minutes!
DIY craft propeller anemometer, connected to BBC Micro:bit using Snap:bit and Snap Circuits.
The Pomodoro technique is a time management method. The technique uses a timer (work for 25 minutes, rest for 5, and so on).
Micro:Bit Police Red and Blue Flashing LEDs and Siren
Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.
Super simple yet fun humidity project. Easy assembly and programming, you'll be ready to shake in 5 minutes.
Learn how to turn your micro:bit to a countdown timer that emits light and sound using Snap Circuits components.
Learn how to power the micro:bit from the battery holder of Snap Circuits.
Learn how to play sounds and music from the BBC micro:bit through the Whistle Chip (WC) of Snap Circuits.
Learn how to play sounds and music from the BBC micro:bit through the Speaker of Snap Circuits.
Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Learn how to program the micro:bit to turn the DC Motor (M1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.
Turn the LED from Snap Circuits into a Morse code beacon with the help of the BBC micro:bit.
Build your own pot of gold for St. Patrick's Day from Lego bricks and make it count the coins with the help of Micro:bit and Snap Circuits.
Learn how to use the photoresistor (RP) of Snap Circuits as a light sensor input for the micro:bit.
Learn how to apply special effects on the LED of Snap Circuits with the help of the BBC micro:bit.
Learn how to change the brightness of the connected Red LED (D1) of Snap Circuits by writing an analog signal to the micro:bit pin.
Blow Game is based on the project "Measure Wind Speed with Micro:bit and Snap Circuits" in which two players try to over blow the other.
Terms. Site powered by Hackster.io