Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Learn how to turn your micro:bit to a countdown timer that emits light and sound using Snap Circuits components.
Learn how to apply special effects on the LED of Snap Circuits with the help of the BBC micro:bit.
Learn how to change the brightness of the connected Red LED (D1) of Snap Circuits by writing an analog signal to the micro:bit pin.
Learn how to control the state of the LED with the press switch.
Turn the LED from Snap Circuits into a Morse code beacon with the help of the BBC micro:bit.
Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.
Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.
Micro:Bit Police Red and Blue Flashing LEDs and Siren
Terms. Site powered by Hackster.io