Learn how to program the micro:bit to turn the Lamp (L1) of Snap Circuits on and off with the help of the NPN Transistor (Q2).
Learn how to use the photoresistor (RP) of Snap Circuits as a light sensor input for the micro:bit.
Control your Lego® Power Functions motors using your micro:bit, an infrared LED and MakeCode.
Build a simple remote control car with Micro:bit for kids.
After shaking the micro:bit, it generates a random number (0 to 31), which will be shown with the led matrix (0 to 5 dots, 5 bits).
Measures and records temperature with BBC Micro:bit.
Build a magic trick to amaze your friends that uses the micro:bit’s compass to detect a nearby magnet!
A Master Microbit(Teacher) issues out math equations to Client Microbits(Students). Students then compete to be first w/ the correct answer.
DIY craft propeller anemometer, connected to BBC Micro:bit using Snap:bit and Snap Circuits.
Learn how to connect a Snap Circuits LED to the snap:bit and control it with the micro:bit.
Show the status and sensor value to an OLED display.
Learn how to turn your micro:bit to a countdown timer that emits light and sound using Snap Circuits components.
A Master Micro:bit (teacher) issues math equations to Client Micro:bits (students). Students then compete to be first w/ the correct answer.
A Micro:bit-based game to help teachers train their students in math through a fun and competitive manner by counting LEDs in icons.
Learn how to power the micro:bit from the battery holder of Snap Circuits.
Learn how to play sounds and music from the BBC micro:bit through the Speaker of Snap Circuits.
Learn how to play sounds and music from the BBC micro:bit through the Whistle Chip (WC) of Snap Circuits.
Turn any LED from Snap Circuits into a blinking LED. The micro:bit will automatically turn the LED on and off every second.
Short of batteries? Power your Snap Circuits from the micro:bit!
Learn how to apply special effects on the LED of Snap Circuits with the help of the BBC micro:bit.
Turn the LED from Snap Circuits into a Morse code beacon with the help of the BBC micro:bit.
Learn how to change the brightness of the connected Red LED (D1) of Snap Circuits by writing an analog signal to the micro:bit pin.
Learn how to control the state of the LED with the press switch.
Learn how to receive input from the Press Switch (S2) of Snap Circuits and process it with the micro:bit.
Terms. Site powered by Hackster.io